PBR Panel - Bonderized

Metal Roofing & Metal Wall Panels

Bonderized will look like a weathered zinc or an old metal roof. It was developed because it is easier to paint than galvanized and many other finishes. However, in recent years architects have used Bonderized for roofing and siding without applying a paint to the steel. This is done to achieve a beautiful dull gray weathered look. Bonderized is NOT a paint finish and there is no paint warranty. Bonderized also known as " Paint Grip " looks excellent from BOTH up close and from a distance.

Bonderized can be used in exterior or interior applications. It is a perfect solution for an interior application as it arrives looking patina'd.

If you are interested in this color I would highly recommend requesting a sample of PBR Panel in Bonderized. You really need to see this panel up close to appreciate the beauty and authenticity of this finish.

The two main advantages in using Bonderized when compared to Zinc or Galvanized are:

1. Bonderized arrives looking weathered. You don NOT have to wait for it to look dull and weathered.
2. Significant cost savings when compared to Steelscape Vintage or zinc finishes.

There are some things to be cautious of when using Bonderized for metal roofing and siding:

1. NO WARRANTY

2. Material may develop white rust after installation.

3. When the material arrives on the jobsite it cannot get wet. Whether that moisture is from rain and/or condensation from a cold to hot day. If moisture gets into a tightly stacked bundle and sits there it will cause white rust.

4. Scratches easily.

If any of the above concerns are a problem than we would recommend that you look at Patina or Vintage. Both are painted products designed to look like a dull gray weathered product. See the home page of this website for more info.

R panel is the nicest panel available for the least amount of money. A metal roof installation on a home or business is a smart investment in regions with volatile weather. Persistent rain and wind can damage typical shingled roofs, requiring costly repairs almost every year. Our R-Panel metal roofing and siding, often referred to as a Purlin Bearing Rib (PBR) Panels, are a low-maintenance, durable alternative to conventional roofing and adds extra protection against the elements by including a purlin bearing leg that overlaps between panels sealing out moisture and wind. These panels can be installed either on a solid substrate or open framing such as metal purlins or wood support beams.

For construction projects that require low cost metal roofing materials, Metal for Roofing offers several exposed fastener metal roofing panel options that is suitable for commercial, industrial, agricultural, and residential settings. Our metal R-Panels are easy to install using self-drilling fasteners and can also be used as siding for wall, interior, and linear panel applications. R-panel is great for self-storage buildings, as equipment screens, for architectural accents, as decorative fencing, as a textured ceiling, or even as an interior wall treatment. In many cases, you will see our metal PBR Panels being used horizontally in the architectural community and positioned vertically in the commercial and agricultural industries. No matter how you plan to use your metal roofing panels, feel comfortable knowing, when you order from metal from roofing, there is no middle man. We are the manufacturer of Metal R-Roofing Panels & Siding. We sell direct to all general contractors, roofing companies, and homeowners.

Metal Roof Design Ideas

R-Panel is easy to install and can be used in a variety of applications including roofing and siding material for commercial, industrial, agricultural, and residential projects.

• Exterior applications: Total roofing area, an accent to a roof in conjunction with other architectural elements of design, metal siding, decorative fencing, restaurants, movie sets and much more.
• Interior applications: Focal point or backdrops such as backsplash in a bath or kitchen, textured ceiling, and a wall treatment.

ORDERING INFORMATION

Excellent customer service is important to us. When you place your order with Western States Metal Roofing you can expect the following:

• Knowledgeable Sales Associates - Helpful and friendly sales associates that will answer all of your questions.
• Made to Order Panels - We cut your metal roofing and metal siding panels to the exact lengths needed.
• Fast Turnaround - Typical two week maximum lead times. However, if you need it quicker, we normally can accommodate just about any completion schedule.
• Shipping Convenience - We have route trucks that service anywhere in the USA and Canada.
• Affordable Shipping - Immediate and inexpensive shipping.

Click on either picture below to see available flat sheets and coil, or trim and flashings.

You May Also Be Interested In These Products:

Metal Panels That Look Like Reclaimed Wood

Save up to 75 % in material cost when compared to real reclaimed lumber.

No maintenance and limited 40 year paint warranty.

Real Rusted Roofing

Rusted Roofing is produced in two different finishes: A606-4 (aka Corten) or Bare steel. Available panels include corrugated, standing seam, R-Panel, flush wall & more.

Pre-Painted Metal That Looks Weathered Gray

Metal roofing that looks weathered and gray. This pre-painted metal looks like a dull gray galvanized finish. These colors are both durable and stunning to look at.

Pre-Painted Metal That Looks Patina'd Copper

Why pay for an expensive copper roof ? Metal roofing and siding that has been pre-painted to look like patina'd copper is a growing favorite among architects and builders. Huge cost savings when compared to real copper.

Blackened Steel Series®

Painted panels that look like blackened steel and other dark aged metals. Available In Metal Roofing/Wall Panels, Flats and Coil. 24 Gauge/Kynar

Dark Colored Matte Finishes And Dark Bronzes

The latest trend in architecture is the use of dark matte finishes for metal roofing/siding. Our two newest colors Black Ore Matte and Matte Black will give your house a beautiful and unique look.. We also carry Dark Bronze and Medium Bronze Kynar colors.

Painted To Look Like Galvanized With Orange or White Rust Spots

Galv-Ten Robust is a color that looks like a weathered galvanized and has white rust spots throughout. Streaked and Speckled Galvanized Rust look like a really old galvanized panel that has begun to get orange rust streaks or spots.

Streaked Series

There Are No Other Paint Prints That Even Come Close To The Authenticity Of The Streaked Series. It Is Designed Specifically For 7/8" Corrugated And Is A Pre-Painted Finish That Is Available In 4 Different Color Replications: Orange/Brown Rusted Roofing, Aqua Green/Brown Copper, Blue/Green Copper, Weathered Galvanized With Orange Rust Streaks

Bonderized®

Bonderized is also referred to as Paint Grip. It is a product that looks like an old weathered steel. This is NOT a paint finish. Available in roofing, flats, and coil.

Rezibond®

ReziBond® Coating Looks Like Gray Gun Metal. This is NOT a Paint Finish. Available in Metal Roofing, Flats, and Coil.

Vari-Cool®

VARI-Cool Color Changing Paint System. This Exotic Paint System Is Unlike Anything You Have Ever Seen. 17 Different Colors - Request A Color Chip.

Standard Painted & Galvalume®

Large Color Selection. Great Paint Warranty. Excellent Pricing and Quick Lead Times. Available In Metal Roofing, Flats, and Coil.

Trim and Flashings

Flashing and trim available in steel with coordinating finishes and colors for your residential, commercial, industrial or agricultural metal roofing project.

Flat Sheets/Coil

Coil and Flat sheets can be processed to any width or length. Shop our huge selection of different gauges and widths.

Metal Carports

Heavy duty inexpensive DIY metal carports and RV shelters. Large selection of shelters and carports for all of your storage needs. Route trucks servicing the entire country.

Purlins

Metal Purlins and Cee Channel are in stock. Cee Purlins and Zee Purlins. Galvanized and Red Prime Painted. Immediate availability.